Textron Jacobsen JZT 2230 23HP KAW W/52 SIDE DISCHARGE User Manual

WARNING: If incorrectly used this machine can cause severe injury. Those who use
and maintain this machine should be trained in its proper use, warned of its dangers
and should read the entire manual before attempting to set up, operate, adjust or
service the machine.
SETUP, PARTS & MAINTENANCE
MANUAL JZT 2000 SERIES
Operation & Safety Manual: 4124369
4124368 REV A
Models:
742221A JZT 2190 19HP KAW W/52 SIDE DISCHARGE
742222A JZT 2230 23HP KAW W/52 SIDE DISCHARGE
742223A JZT 2230 23HP KAW W/61 SIDE DISCHARGE
742227A JZT 2230LC 23HP KLR W/52 SIDE DISCHARGE
742228A JZT 2230LC 23HP KLR W/61 SIDE DISCHARGE
742233A JZT 2250 25HP KAW W/61 SIDE DISCHARGE

Textron Jacobsen JZT 2230 23HP KAW W/52 SIDE DISCHARGE Specifications

General

Brand	Textron
Model	Jacobsen JZT 2230 23HP KAW W/52 SIDE DISCHARGE
Category	Lawn Mower
Language	English

Summary

Assembly and Setup Guide

Seat Installation and Tire Pressure

Instructions for installing the operator's seat and setting tire pressure.

Deck Leveling and Traction Lever Adjustment

Steps for properly leveling the mower deck and adjusting traction levers.

Final Preparations Before Operation

Final checks and preparations before operating the machine.

Maintenance Procedures

Daily Checks and Lubrication Schedule

Essential daily checks and points requiring lubrication.

Hydraulic and Engine Oil Maintenance

Procedures for checking and changing hydraulic and engine oil.

Air Cleaner and Cooling System Servicing

Maintenance for air cleaners and engine cooling systems.

Blade Maintenance and Installation

Safe procedures for blade removal, sharpening, balancing, and installation.

Adjustments and Settings

Deck Leveling and Height of Cut Adjustment

Adjusting the mower deck level and cutting height.

Control Lever and Parking Brake Adjustment

Adjusting control levers and the parking brake mechanism for proper function.

Hydrostat Neutral and Reverse Adjustments

Adjusting the hydrostatic transmission for neutral and reverse operation.

Specifications and Parts Identification

Engine and Fluid Specifications

Technical details on engine models, fluid capacities, and types.

Cutterdeck and Component Specifications

Specifications for cutterdecks, construction, and specific torques.

Key Assembly Diagrams and Parts Lists

Exploded views and parts lists for major assemblies like engine deck and hydraulics.

Wiring Harnesses and Decal Locations

Electrical harness schematics and locations for machine decals.