1918
Digital thermo-hygrometer
Digital thermo-hygrometer
• Press and hold the MODE button.
• The alarm symbol will appear and the hour digit will be flashing.
• Press the MAX/MIN/
or °C/°F/
button to adjust hours.
• Confirm the setting with the MODE button and set minutes in the
same way.
• Confirm the setting with the MODE button.
• The adjusted alarm time and the alarm symbol appear on the display.
The alarm is activated.
• Press the MODE button again to return to the current time.
• When the adjusted alarm time is reached, the alarm will ring.
• Press any button and the alarm will stop.
• If the alarm is not stopped manually, the alarm sound automatically
turns off after a few minutes and will be reactivated at the same time.
• The alarm symbol remains on the display.
5.3 Activate and deactivate the alarm time
• Press the MODE button in normal mode, to enter the alarm mode.
• The adjusted alarm time appears on the display.
• Press the MAX/MIN/
button to activate or deactivate the alarm. The
alarm symbol appears or disappears on the display.
• Press the MODE button to return to normal mode.
5. Operation
• Press and hold the MAX/MIN/
or °C/°F/
button in the respective
setting mode for fast mode.
• The device will automatically quit the setting mode if no button is
pressed for 60 seconds.
5.1 Manual setting of the clock and calendar
• Press and hold the MODE button.
• The year indication will be flashing.
• Press the MAX/MIN/
or °C/°F/
button to adjust the year.
• Press the MODE button and the setting sequence is shown as fol-
lows: Month, day, 12 (PM appears on the display after 12 h) or 24
hours display, hours and minutes. Adjust with the MAX/MIN/
or
°C/°F/
button.
• Confirm the setting with the MODE button.
• The set time appears on the display.
5.2 Setting of the alarm time
• Press the MODE button in normal mode, to enter the alarm mode.
• 0:00 (default) or the last adjusted alarm time appear on the display.
TFA_No. 30.5042_Anleitung_03_19 20.03.2019 11:58 Uhr Seite 10
To Next Page
Loading...
