Dutch, NE ZO MA DI WO DO VR ZA
Italian, IT DO LU MA ME GI VE SA
Spanish, ES DO LU MA MI JU VI SA
French, FR DI LU MA ME JE VE SA
• The Time Setting Mode will automatically exit in 5 seconds without any
adjustment.
• During Daylight Saving Time DST appears on the display.
• Choose 12 HR or 24 HR system by pressing the “+ (12/24)” button (B5).
1.5.2 Snooze Alarm Clock Function:
• Press “MODE” button to select to view Alarm Time:
Time Date/Month /Weekday Alarm Time (“ ” appears on the LCD)
• When viewing the Alarm Time, hold “MODE” button for 3 seconds to enter
Alarm Time setting. Press “+” or “-” buttons to adjust the alarm time. Confirm
hours with “MODE” button and switch to minutes setting.
• Press “ALARM” button to switch alarm on or off. If it is on, “ ” is shown on
the LCD. Press any button to stop the alarm.
• Press “SNOOZE” when alarm is sounding to activate snooze alarm. “ ” is
flashing on the LCD. 5 minutes later the alarm will start again.
1.5.3 Maximum/Minimum function:
• Press “MAX/MIN” button to show the maximum (MAX) and minimum (MIN)
outdoor temperature, indoor temperature and humidity.
• Hold “MAX/MIN” button for 3 seconds to clear the recorded maximum and
minimum reading.
1.5.4 Weather Symbol Setting
• After batteries were inserted, or when holding “WEATHER” button for 3 seconds,
the weather symbol flashes (A1) for 5 seconds. Enter the actual weather during
this time by pressing “+” or “-” button.
• Press “MODE/SET” button to confirm the setting.
• The weather forecast may be not accurate if the entered weather symbol is
incorrect.
1.5.5 Weather Forecast
There are 5 different weather symbols:
To Next Page
