TFA BINGO - Setting the Second Alarm; Backlight Usage; Care and Maintenance; Battery Replacement

2928
BINGO – Radio-controlled alarm clock

• The first alarm time is activated.
• When the adjusted alarm time is reached, the alarm will ring.
• The alarm symbol will be flashing and the backlight will be activated for
5 seconds.
• Press any button and the alarm will stop.
• If the alarm is not stopped manually, the increasing alarm will automati-
cally turn off after certain minutes.
• The alarm symbol rests on the display and the alarm time will be reacti-
vated at the same time.
• When the alarm rings, press the SNOOZE/LIGHT button and the snooze
function will be activated.
• Once the snooze function is activated, zZ will be flashing on the display.
• The alarm will be interrupted for 5 minutes.
• Slide the AL 1 ON/OFF switch downwards (OFF) to deactivate the alarm
function.
• The alarm symbol and the color mark disappear from the display.
8.2 Setting of the second alarm time
• Press the SET 2 button in normal mode.
• 7:00 (default) or the last adjusted alarm time appear on the display.
• Set the alarm time for the second alarm in the same way.
• To activate/deactivate the second alarm function, move the switch AL 2
ON/OFF up (ON)/down (OFF).
BINGO – Radio-controlled alarm clock

9. Backlight
• Press the SNOOZE/LIGHT button.
• The backlight turns on for 5 seconds.
• The device is provided with a light sensor to turn on the light automati-
cally at dark.
• Use the AUTO LIGHT ON/OFF switch at the back to activate or deactivate
the backlight.
• appears or disappears on the display.
• Note: During a DCF signal reception, the lighting is temporarily dis-
abled or cannot be activated
10. Care and maintenance
• Clean your instrument with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the batteries if you do not use the product for a long period of
time.
• Keep the instrument in a dry place.
10.1 Battery replacement
• Change the batteries when the battery symbol appears on the dis-
play.
• Open the battery compartment and insert the two new batteries 1,5 V
AA. Ensure that the battery polarity is correct
• Close the battery compartment again.
TFA_No. 60.2531_Anl_12_21 19.12.2021 11:16 Uhr Seite 15