TGA Breeze 3 - Troubleshooting Scooter Issues; Starting and Power Problems; Control and Indicator Faults; Emergency Stop Procedure

10
1
11
14
44
4. T
. T. T
. TROUBLE SHOOTING
ROUBLE SHOOTINGROUBLE SHOOTING
ROUBLE SHOOTING
1. Your Breeze will not start:
• Check it has not gone into sleep mode.
• Make sure that the key switch is turned on. If it is, the battery condition gauge will be operating. If it is showing
empty – recharge batteries.
• Check overload switches
• Check brake release is engaged
2. The battery condition gauge fails to operate when the key switch is in the on position, check the following:
• Make sure the battery charger is not plugged to the wall outlet, this will prevent drive. Check brake release is
not disengaged.
• Check the battery connectors, battery terminal condition.
• If none of the above contact your Breeze Dealer.
3. If your Breeze does not slow down or the variable speed control does not work:
• Turn off the power on key switch.
• Inform your authorized TGA dealer.
4. The Breeze stops and will not restart.
• Check the overload switch, which can be reset by simply pushing the button in (Section 9. Safety Overload
Switch).
CAUTION:
CAUTION: CAUTION:
CAUTION: If you find for any reason your Breeze does not reduce speed when you let go of the speed control lever,
use the manual brake on the handlebars. If this fails to stop you, switch your Breeze off with the ON/OFF key. The
parking brake will activate immediately and stop your Breeze. Beware the machine will stop very suddenly so brace
yourself with the handlebars and sit back on your seat.
Care! Warning
Care! Warning Care! Warning
Care! Warning This operation should only be carried out as on emergency; continual use of this procedure will damage
the drive transmission and motor brake. Consult your authorized TGA dealer before using your scooter again if you feel
for any reason that your Scooter is not driving correctly or making unusual noise, stop using the scooter. Be SAFE,
contact your TGA dealer, they will be able to advise you.
1
11
15
55
5. TECHNICAL SPECIFICATION
. TECHNICAL SPECIFICATION. TECHNICAL SPECIFICATION
. TECHNICAL SPECIFICATION
Breeze 3
Breeze 3Breeze 3
Breeze 3
Breeze 4
Breeze 4Breeze 4
Breeze 4
Dimensions
:
Length
1550
mm
61”
1650
mm
65”
Width
680
mm
26.8”
680
mm
26.8”
Height (
seat & tiller folded
)
1000mm
39.4”
1000mm
39.4”
Height (no seat
)
890mm
35”
890mm
35”
Weights:
Without batteries 110kg 242.5lbs 117kg 257.9lbs
With 40A/H batteries
124kg
273.3lbs
131kg
288.8lbs
With 7
5
A/H batteries
142kg
313lbs
149kg
328.4lbs
Speeds:
Normal mode
6.4kph
4mph
6.4kph
4mph
Fast mode
12.8kph
8mph
12.8kph
8mph
Max Carrying Weight
551 lbs
250kg
551 lbs
250kg
Ground Clearance
1200mm
5”
1200mm
5”
Max Slope angle
12°
%
12°
%
Turning Radius
2200
mm
86.6
“
1800
mm
70.9
“
Tyre Size Front (Pneumatic)
7
5
m
m
x
2
5
0
m
m
3
”
x
1
0
”
1
00
mm
x
1
50
m
m
4
”
x
6
”
Tyre Size Rear (Pneumatic)
8
8
m
m
x
2
5
0
m
m
3
.
5
”
x
1
0
”
8
8
m
m
x
2
5
0
m
m
3
.
5
”
x
1
0
”
Tyre Pressure Front
40psi
25psi
Tyre Pressure Rear
40psi
40psi
Approx Ra
nge:
40A/H Batteries
32km
19.8miles
32km
19.8miles
7
5
A/H Batteries
45km
27.9miles
45km
27.9miles
The Breeze is manufactured in accordance with Safety Standard EN12184. It complies with CE Approval (Europe) and
is approved by the TNO. TGA reserve the right to alter at any time without prior notice the design, specification,
packaging or price of their products without incurring any obligation.