4
2. ASSEMBLY (WHERE NECESSARY)
The Breeze Midi was pre-delivery inspected and tested prior to dispatch. The batteries may have been
disconnected for delivery purposes only.
The scooter should have been delivered to you in a ready to ride condition, however if for whatever reason it was
delivered in a carton please take the following action.
Remove all the items from the carton and strip the protective packaging materials off each item. Returns are only
accepted when the product is shipped in the original cartons with the original packing material installed. In order
to fit in the carton, the seat back and tiller will be folded down.
Removal and Replacement of seat – To remove seat, pull the lever located under the seat ath the right hand
side (fig 2.2) forward and lift the seat straight up and out. Take care as the seat is a fairly heavy component.
Replacing the seat is just a reversal of the above.
Tiller Adjustment – Release the tiller adjusting lever by pushing to one side, then move the tiller up or down to
your choice. Make sure it locks in before use, fig 1.1.
Rear Cover Removal – Remove seat, then unscrew the three black fixing screws located one in each corner of
the cover and pull the cover up sharply from the back as there are two clips locating it. Replacement is just a
reversal of the above, ensuring the cover locates correctly.
Care! Warning
The Breeze Midi is easy to drive but it is essential that you familiarise yourself with the controls and learn to drive
it in a safe area with sufficient room to manoeuver for your safety and that of others. The area should be free of
obstacles and reasonably flat. Mark a practice course for straight line driving, turning in confined spaces, reversing
and driving around obstacles.
3. THE CONTROLS AND INSTRUMENT PANEL
Figs 3 and 4 Provide details of the control system. Listed below are the various controls and their uses.
1. Speed Control Levers - The speed of Breeze Midi is controlled by the levers located on the left and the right
of the instrument console Fig 3.1. and Fig 3.2 Primarily the right hand lever is the forward speed control and the
left hand lever is reverse. However both levers can do both functions simply by pushing up or down. Either lever
can be operated by thumb or forefinger simply by holding a different section of the Delta handlebar and obviously
left or right handed people are accommodated. Always use the lever gently, remembering that the more you
move the lever, the quicker you will go. To stop simply release the lever, the braking is completely automatic and
when the machine has stopped the parking brake will engage and stay on until the machine moves off again.
2. Emergency Brake - All braking on the Breeze Midi is automatic and the emergency brake should never need to
be used. It is only for emergency in the very unlikely event that the automatic braking fails. If used this lever will
bring you safely to a halt. Lever located on left handle bar.
3. Horn – Buttons located either side of instrument console (fig 4.1). The buzzer will automatically sound when
using reverse.
4. Indicators - Left and right hand located on the instrument console (fig 4.2). Push the switch on the same
direction as you need to turn. To stop the indicators, push the button in again
To Next Page
Loading...