5. ENGINE REMOVAL TGB
5-2
ENGINE REMOVAL
Remove the power connector of auto by-
start.
Remove the generator wire and pulse
generator connector.
Remove the spark plug.
Remove the fuel pipe, vacuum hose, and
throttle valve cable from the carburetor.
Loose the strap screw of the air cleaner
guide, and then the air cleaner guide.
Remove the exhaust muffler (Bolts ×
2, Nuts × 2).
Spark plug
Bolts×2
uto by-start
connector
Generator connector
pulse generator
connector
Spark plug Throttle valve cable
The strap screw
To Next Page
Loading...
