23
Regular Maintenance
Cleaning Lint Filter
• The CLEAN FILTER lamp is on when the lint lter is blocked. It results in longer drying time, so
please clean the lter after every drying.
• In case the CLEAN FILTER lamp is on during operation, the buzzer will sound at the end of drying.
The buzzer stops and the CLEAN FILTER lamp is off when the door is opened.
1
Press the lint pocket latch and take out the
lint lter.
2
Detach the inner lter by holding its latch.
Lint filter
Lint pocket latch
Inner filter
(black)
Lint pocket
(light blue)
Inner filter latch
3
Remove lint from the inner lter and lint
pocket. In case of stubborn dirt, cleanse them
with neutral detergent. Ensure to dry the inner
lter completely after cleaning.
4
Set the inner lter to lint pocket, then set the
lint lter at original position.
Soft brush
Inner filter
Lint pocket
Monthly Maintenance
Cleaning of Air Inlet Filter Maintenance of Dryer Body
1
Pull out the air inlet
lter which is located
at the bottom of the
dryer.
Air inlet
filter
• Clean the dryer body with moist towel.
In case of stubborn stain, wipe with
neutral cleanser.
2
Remove the dust by
using soft brush.
• Be sure the dryer body is dry before
using.
3
After cleaning, put
the air inlet lter
into the rails at the
bottom of the dryer
properly and push it
back entirely.
Click in
place
Note: Push in until you hear it click into place.
To Next Page