Tharo Systems H-600 Series

Questions and Answers

L
Lori SmithAug 19, 2025
What to do if the LED light turns red on my Tharo Systems H-600 Printer after printing?
- Q
  qweissAug 19, 2025
  If the LED light on your Tharo Systems Printer turns red after printing stops, it could be due to several reasons. First, check for any software setting or program command errors. Next, verify that labels or ribbon are not depleted and replace them if necessary. Also, check for any label stock jams. Ensure that the Printhead Mechanism is properly closed and that the printhead is correctly positioned. Additionally, make sure the sensor isn't blocked by paper or label. Finally, if your printer has a cutter, confirm that it is functioning correctly.
A
Anthony BrownAug 21, 2025
How to fix smudged printouts on a Tharo Systems H-600 Printer?
- J
  Jason MccoyAug 21, 2025
  If your Tharo Systems Printer is producing a smudged or blurry printout, start by checking the print darkness setting. Also, verify whether the Printhead is dirty and clean it if necessary.
R
Robert FullerAug 23, 2025
Why is my Tharo Systems Printer printing blank labels?
- K
  Kevin BurchAug 23, 2025
  If you've started a print job on your Tharo Systems Printer but nothing is printing on the label, begin by checking that the ribbon is installed correctly, with the inked side facing the label media. Also, make sure that you've selected the correct printer driver and the correct label stock and print mode in your settings.
M
mayandrewAug 26, 2025
Why is my Tharo Systems H-600 Printer skipping labels?
- M
  Melanie GutierrezAug 26, 2025
  If labels are skipped while printing with your Tharo Systems Printer, check the label height setting for errors. Also, verify that the sensor isn't covered by paper or is dirty. Clean the sensor if needed.
B
briana53Aug 28, 2025
What to do if labels jam in my Tharo Systems H-600 Printer?
- W
  williamsjoelAug 28, 2025
  If labels are jamming when printing with your Tharo Systems Printer, clear the label jam. Ensure that the Printhead is clean.
B
Brendan RomanAug 30, 2025
How to adjust print position on my Tharo Systems Printer?
- N
  Natasha BeckerAug 30, 2025
  If the printout from your Tharo Systems Printer is not in the desired position, start by checking if the sensor is covered by paper or is dirty. Clean the sensor if necessary. Ensure that the label roll edge is aligned with the Label Width Guide.
J
Janet DunnSep 1, 2025
Why is my Tharo Systems H-600 only printing part of the label?
- S
  sheri63Sep 1, 2025
  If only part of the label is being printed by your Tharo Systems Printer, first check if label or ribbon is stuck on the Printhead. Next, check if the application software has errors, and verify the start position setting for any mistakes. Also, inspect the ribbon for wrinkles and ensure the Ribbon Supply Shaft isn't creating friction with the platen roller. Finally, check if the power supply is within the voltage range.
K
kim10Sep 4, 2025
How to fix incomplete prints on my Tharo Systems H-600 Printer?
- A
  Andrew ChavezSep 4, 2025
  If a part of the label is not printed completely by your Tharo Systems Printer, begin by checking if the Printhead is dirty. Use the internal command “~T” to perform a Test Print and check if the Printhead can print across its entire width. Also, check the media quality.
T
Tara HansonSep 6, 2025
What causes the cutter on my Tharo Systems Printer to cut crooked?
- F
  fosterrobertSep 6, 2025
  If the cutter on your Tharo Systems Printer did not cut straight, check if the label stock is installed correctly.
A
Adriana EdwardsSep 8, 2025
Why isn't the cutter on my Tharo Systems Printer cutting the label?
- S
  Sandra DiazSep 8, 2025
  If the cutter on your Tharo Systems Printer is not cutting the label successfully, verify that the label thickness does not exceed 0.16mm (.006”).

Summary

Product Overview

General Information

Overview of THARO H-400/H-600 Series printers for industrial applications.

Printer Options

Details available optional modules like rewinders, cutters, and applicators.

Technical Specifications

Lists detailed technical parameters for H-400 and H-600 series models.

Safety and Handling

General Safety Tips

Essential safety precautions for operating and handling the printer.

Unpacking and Accessories

Instructions for checking printer packaging and included accessories.

Printer Setup and Identification

Identifying Printer Components

Identifies external and internal parts of the printer using diagrams.

Initial Printer Setup

Steps for connecting the printer to a power source and computer.

USB Installation Guide

Step-by-step instructions for installing the printer driver via USB.

Control Panel and Settings

Control Panel Overview

Explains the function of buttons, LEDs, and the LCD display.

Setting Mode Navigation

How to enter and navigate the printer's setting mode menu.

Setting Mode Options

Details various configurable settings within the printer's menu.

Setting Mode Menu Diagram

Visual representation of the printer's setting mode structure.

Media and Accessory Installation

Ribbon Installation

Step-by-step guide for loading thermal transfer ribbons.

Label Installation

Instructions for loading label stock into the printer.

Stripper Sensor Setup

How to set up and activate the label stripper sensor.

Installing Optional Accessories

Guides for installing internal rewind, strip-and-peel, and cutter modules.

Advanced Operation and Connectivity

PS;2 Keyboard Operation

Using a PS/2 keyboard for stand-alone printing and mode selection.

Downloading Formats with EASYLABEL

Procedures for downloading label formats to printer memory using software.

Communication Interfaces

Details on connecting via Parallel, Serial, USB, PS/2, and Applicator interfaces.

Troubleshooting and Maintenance

Self-Test and Dump Mode

Procedures for performing self-tests and using dump mode for diagnostics.

LCD Error Messages and Solutions

Lists common error messages and their recommended solutions.

Maintenance Procedures

Instructions for cleaning, adjustments, and general printer upkeep.

Warranty Information

Warranty Exclusions and Conditions

Specifies warranty limitations, exclusions, and required procedures.