The Handy THLS-C User Manual

The Handy THLS-C

13 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Page 1

OPERATOR’S MANUAL AND PARTS LIST

LOG SPLITTER - THLS-C

Spares & Support 01793 333212

www.thehandy.co.uk

Before use please read & understand this manual, paying particular

attention to the safety instructions.

2011 v1

Table of Contents

Questions and Answers:

M
Maria WagnerAug 3, 2025
How to fix The Handy Log Splitter when it won't split logs?
- E
  Ethan HillAug 3, 2025
  If the log fails to split in The Handy Log Splitter, consider the following: * Ensure the log is positioned correctly. * If the log exceeds the permitted dimensions or the wood is too hard, try cutting a smaller part or reducing the log size using other tools. * Sharpen the wedge and file if necessary. * Check for oil leaks using a piece of wood or card. If you locate a leak, contact your local dealer. * The causes may be: Incorrect positioning of log, the log exceeds permitted dimensions, the wood is too hard for the machine, wedge does not cut or hydraulic pressure is low.
M
Mr. Michael Johnson IIAug 13, 2025
Why does The Handy THLS-C's log pusher vibrate?
- M
  melanie55Aug 13, 2025
  If the log pusher or cams on your The Handy Log Splitter advance jerkily or with strong upward vibrations, it may be due to air in the hydraulic circuit. First, check the oil level and refill if necessary. If the problem persists, it is best to contact your local dealer for assistance.

The Handy THLS-C Specifications

General

Brand	The Handy
Model	THLS-C
Category	Log Splitter
Language	English

Summary

Safety Instructions

Use of the Log Splitter

Application Conditions

Specifications and Electrical Requirements

List of Major Components

Log Splitter Operation

To Free a Jammed Log

Sharpening the Wedge and Cleaning the Guide Rail

Replacing Hydraulic Oil

Trouble Shooting

Log Fails to Split

Issues and solutions when logs do not split correctly due to positioning, wood hardness, or wedge condition.

Log Pusher/Cams Jerky Operation

Problems with jerky log pusher or cams, often caused by low hydraulic pressure or air in the circuit.

Oil Leaks

Troubleshooting oil leaks from external points or the oil tank, potentially due to worn seals or loose screws.

Parts Diagram

Parts List

EC Declaration of Conformity