THE-ONE SPILLO - Assembly and Configuration; Folding System; Opening System

3. Assembly and conguration
Open
Scooter open - unfolded
Scooter closed- folded
Closed
Closing system
Opening system
1. Make sure the scooter has been turned off, closed and the stand is bent.
2. Use your hand or leg to bend the stem of the handlebar to the bottom of the floor, activate the folding
lever.
3. Put the handlebar down until you hear the “click” sound.
1. Stop the base and lift the handlebar stem, open completely until you hear the “click” sound.
2. Press the switch and make it active.
WARNING! If you do not hear the “click” sound, you must press the folding lever.
Press the
lever
Press the
lever
Press the lever to fold
it all the way down
(closing) after the lever
is opened
Press the lever to fold
it all the way down (in
opening) after the lever
is opened.