Folding adjustment instructions:
Description of the suspension for the absorption of rear impacts
1. When the folding space of the device is too large, the upper screw can be turned to the right with a
hexagonal key. The left and right keys and screws must be adjusted.
2. Attention: before adjusting, make sure the vehicle is in lockout mode. After adjustment, make sure the e
button can be used normally. The locking pin can normally be positioned downwards.
1. The rear suspension can be adjusted to suit your preferences. Turning to the right will increase the
strength of the suspension, while turning to the left will decrease.
2. Adjustment tool: wrench.
Adjustment screws
Position of
the locking pin
Nut adjustment
To Next Page
Loading...
