Need help?Do you have a question about the The Pond Guy ClearSpring Pro and is the answer not in the manual?
General| Brand | The Pond Guy |
|---|---|
| Model | ClearSpring Pro |
| Category | Swimming Pool Filter |
| Language | English |
Position the waterfall to ensure proper water circulation and viewing pleasure from indoor and outdoor areas.
Thread the PVC male adapter into the spinweld fitting located on the bottom side of the waterfall box.
Compact the area, level the box side-to-side, and tilt slightly forward to ensure water flows forward.
Glue 1.5" flexible PVC pipe into the PVC male adapter using PVC primer and cement.
Secure the pond liner to the waterfall box using clips, silicone, and screws for the weir.
Position the filter mat and fill media bags with biological media in the waterfall box.
Position the skimmer at the pond edge, opposite the waterfall, for optimal water circulation.
Excavate the area for the skimmer box, ensuring it meets the pond liner at the correct depth.
Ensure the skimmer is level and backfill around it with compacted soil to prevent settling.
Secure the pond liner to the skimmer face using clips, silicone, and screws for the snout.
Place screw caps on the inside of the skimmer box after attaching the snout and cutting the liner.
Attach check valve, position pump, and connect flexible pipe and power cord to the skimmer.
Insert skimmer mats and net, then place the natural landscape lid to disguise the skimmer.
To Next Page
