— 30 —
Updating the Firmware
Specifications
Make sure the Singing Machine USB Flash Drive is securely plugged into the USB slot
before running the update. DO NOT interrupt the update. If interrupted during the update
process, the software can become corrupted and the unit will no longer function properly.
1. Create a folder on the Singing Machine USB Flash Drive named “user_updata”.
2. Download the latest software (e.g xxxxxx.img) from www.singingmachine.com/
softwareupdates and save it into this folder.
3. Plug the Singing Machine USB Flash Drive into the USB jack on the unit and turn the
unit on.
4. The unit will update automatically.
AUDIO
Output Power ................................................................................................................... 7 Watts (RMS)
Output Impedance ........................................................................................................................4 Ohms
BLUETOOTH
Bluetooth Version ...................................................................................................................V2.1 + EDR
Working Distance ...........................................Up to 30 feet/10 meters measured in open space
USB and SD
Format .......................................................................................................................................32G FAT32
JACK
Microphone .......................................................................................... 6.3 mm Microphone Jacks (2)
GENERAL
Power ............................................................................................................ AC 100-240V, 50-60 Hz
Dimensions - Main Unit ............22.05 (H) x 13.4 (W) x 14.2 (D) in (560 x 340 x 360 mm)
Weight - Main Unit ......................................................................................................19.2 lbs (8.7 kg)
Microphone ........................-74 dB 600 Ohms impedance with 6.3 mm Dynamic Microphone
Specifications are subject to change without notice.
To Next Page
Loading...
