— E10 —
Operation
Playing a CD (Continued)
10
SKIP: Advance or go back one
track by pressing the /
(Navigation) button or /
(Navigation) button respectively.
11
REPEAT: During playback, press
the REPEAT/PROG button once
to repeatedly play the selected
song; the Repeat indicator
will blink. Press the REPEAT/
PROG button a second time to
repeatedly play the whole CD; the
Repeat indicator will light solid.
Press it again to cancel Repeat
function, the Repeat indicator will
turn off.
12
PROGRAM: You can program
up to 20 tracks on any disc for
playback in any desired order.
While in the Stop mode, press
the REPEAT/PROG button; the
Program indicator will blink and
“P01” will appear on the display
indicating the first program is
ready to program.
13
PROGRAM: Select the first track
using the / (Navigation) and
/ (Navigation) buttons. Press
the REPEAT/PROG button again
to confirm the entry. Repeat to
set up to 20 tracks into memory.
When done, press the /STOP
button to start playback.
Program Notes:
• Press the /STOP button TWICE to
clear the program. Press and hold the
/STOP button to stop.
• If more than 20 tracks are attempted
to be programmed, “FUL” will appear in
the display.
at
ak
al
am
am
To Next Page
Loading...
