The Singing Machine SML2350 - USB Programming and Playback Management; USB Track Programming and Pausing

— E15 —
Operation
Playing Songs from the USB (Continued)
ao
an
12
PROGRAM: You can program up
to 20 tracks for playback in any
desired order. While in the Stop
mode, press the REPEAT/PROG
button; the Program indicator
will blink and ”P01” will appear
on the display indicating the first
program is ready to program.
Select the first track using the
/ and / buttons. Press
the REPEAT/PROG button again
to confirm the entry. Repeat to
set up to 20 tracks into memory.
When done, press the /STOP
button to start playback.
Notes:
• Press and hold the /STOP button
to stop. While in the Stop mode, press
the /STOP button TWICE to clear
the program.
• If more than 20 tracks are attempted
to be programmed, “FUL” will appear
in the display.
13
PAUSE: During playback, if
you wish to pause the music
momentarily, press the /
STOP button; the Play/Pause
indicator will blink. Press again to
resume normal playback.
14
Press and hold the /STOP
button to stop playback.
15
Press the button to turn the
unit off.
al
am
al