— E15 —
Operation
Using a Bluetooth Device
1
Connect the unit as described
previously. Press the power ON/OFF
button to turn the unit on.
2
Repeatedly press the CDG/USB/BT
button to select the Bluetooth mode;
“bt” will blink in the display as the unit
automatically searches for and pairs
a previously paired Bluetooth device
(if previously paired). If no previously
paired devices are present, connect as
shown in the next step.
Note: You can also press the PAIR button to
disconnect any paired devices in order
to pair another device.
3
Turn on your device’s Bluetooth
option in settings to search for a
discoverable device with a Bluetooth
signal. Select “Singing Machine” from
the device results on the Bluetooth
menu, “bt” will light solid in the display.
The Bluetooth indicator will light and a
successful pairing sound will be heard.
Note: Also refer to the user manual of
your Bluetooth device for detailed
instructions.
4
The Bluetooth indicator will light and a
successful pairing sound will be heard.
Notes:
• If your Bluetooth prompts you for a
passcode during the pairing process, please
enter “0000” to connect.
• On some Bluetooth devices, once pairing is
complete, select your Bluetooth device as
“Use as Audio Device” or similar.
• If connection is lost after successful pairing,
check to make sure the distance between
speaker and Bluetooth-enabled device does
not exceed 30 feet/10 meters.
•“Bluetooth” will blink on TV screen, and will
stop blinking after successful connection.
Please connect your Music Device
Your Music Device is connected
3
4
Please connect your Music Device
Your Music Device is connected
u
v
To Next Page
Loading...
