— E13 —
Operation
Using the AUX IN Jack
1
Connect the unit as described
previously. Press the /LIGHTS
button to turn the unit on.
2
Connect the external unit to the
AUX IN Jack on the rear of this
unit. Connecting an external unit
will allow the audio to be played
through your Singing Machine.
Repeatedly press the FUNC button
to select the Aux In mode; “AU” will
appear in display.
NOTES:
• It is highly recommended to set the
volume on the auxiliary unit to 1/3 or
lower to avoid distortion.
• Skipping files/tracks is not possible on
this unit when using an external device.
3
Adjust the volume using the
MASTER VOLUME/ /STOP
control on this unit or the volume
control on your external device.
4
Connect microphone(s) and
slide the ON/OFF switch on the
microphone to the ON position.
x
w
v
v
u
To Next Page
Loading...
