The Swingset Swing Extreme User Manual

Section 1
© 2021 The Swingset Company
INSTALLATION INSTRUCTIONS
Need a hand? Give us a call. 888.525.1185
1The Swingset Company
Also, feedback is appreciated. If you think any part of this manual is
confusing, or if you have suggestions for how to better explain one of the
steps, please let us know by emailing info@theswingsetco.com
Swing Extreme

The Swingset Swing Extreme Specifications

General

Product Name	The Swingset Swing Extreme
Category	Play Sets & Playground Equipment
Number of Swings	2
Recommended Age	3-10 years
Assembly Required	Yes
Dimensions	12 ft x 8 ft x 7 ft

Summary

Installation Introduction and Safety

Tools Needed

List of tools required for assembling the playset.

Safety Instructions

Important safety guidelines and precautions for playset use and assembly.

Section 1: The Fort Frame

Step 1: Create Two A-Frames

Assemble the basic A-frame structures for the fort.

Step 2: Attach Floor Beams

Connect floor beams to the A-frame posts for the first level.

Step 3: Connect Both A-Frames

Join the two A-frames together to form the base of the fort.

Step 4: Attach Braces

Add braces for structural integrity and stability to the fort frame.

Step 5: Install Deck Floors

Place the deck flooring onto the fort structure.

Step 6: Attach Ladder, Slide & Top Beams

Install the ladder, slide, and upper crossbeams.

Step 7: Attach Vertical Boards & Crossbar

Add vertical boards and a crossbar to the fort's upper section.

Step 8: Secure Deck Floors

Fasten the deck floors securely to the fort frame.

Section 2: Swingset Attachments

Step 9: Attach Climbing Wall

Mount the climbing wall onto the playset structure.

Step 10: Attach Walls

Install the five wall panels onto the fort.

Step 11: Install Picnic Table

Position the picnic table under the fort deck.

Step 12: Attach Chalkboard

Mount the chalkboard onto the playset's support posts.

Section 3: Swing Beam & Final Assembly

Step 1: Attach Fort Bracket

Secure the fort bracket to the playset's upper beam.

Step 2 & 3: Attach A-Frame Bracket to Swing Beam

Connect the A-frame bracket to the swing beam.

Step 4: Attach A-Frame Legs to Swing Beam

Attach the A-frame legs to the swing beam assembly.

Step 5: Lift Swing Beam onto Fort Bracket

Position and secure the swing beam assembly onto the fort.

Step 6: Attach Cross Bar & Tighten Bracket

Add the crossbar and tighten all swing beam bracket components.

Step 7: Install Tarp Roof

Cover the playset with the tarp roof for weather protection.

Step 8: Install Ship Wheel, Telescope & Flag

Add decorative and functional accessories like the ship wheel and flag.

Layout Diagram

SWING EXTREME Layout Diagram

Diagram illustrating the overall layout and dimensions of the swing Extreme playset.