All device settings can be saved in up to 20 different user presets and then recalled as
needed. That way you can easily restore your settings for different rooms or stage
set-ups.
1. Press [SAVE].
ð
The ‘Store Preset’ menu opens.
2. Use the jog wheel to select a user preset between ‘U01’ and ‘U20’. Press the
jog wheel to confirm.
3. Using the jog wheel, enter the name of the user preset by changing the
Default Preset
standard value.
ð
The settings are saved.
4. Press [EXIT].
1. Press [RECALL].
ð
The ‘Load preset’ menu opens.
2. Use the jog wheel to select a user preset between ‘U01’ and ‘U20’ or the basic
setting ‘F00’. Press the jog wheel to confirm.
ð
The settings are loaded.
User presets
Save use preset
Call up user preset
Operating on the unit
DSP 204, DSP 206, DSP 306, DSP 408
13