4. Choose to enable CHAP authentication or choose None.
5. Enter a Target Name. This will be used by the Stackable NAS function
to identify this export share.
6. Choose the current year from the Year dropdown.
7. Choose the current month from the Month dropdown.
8. If you’ve enabled CHAP authentication, enter a username and a
password. Confirm your chosen password be reentering it in the
Password Confirm box.
9. Click OK to create the iSCSI volume.
Stackable NAS
The 1U4500’s capacity can be expanded even further using the stackable function.
With it, users can expand the capacity of their network storage systems with up
to 5 other stack target volumes which are located in different systems. These can
be stacked through single network access like SMB or AFP acting as a share folder
type.
For detailed instructions on how to use this feature, please refer to the Stackable
User Guide.
To Next Page
Loading...
