Need help?Do you have a question about the Thecus N4100PRO and is the answer not in the manual?
General| RAID levels | 0, 1, 5, 6, 10, JBOD |
|---|---|
| Storage drive size | 3.5 \ |
| Storage drive capacity | - GB |
| Supported file systems | EXT3, XFS |
| Storage drive interface | Serial ATA |
| Total installed storage capacity | 8 TB |
| Number of storage drives installed | 0 |
| Number of storage drives supported | 4 |
| Flash memory | 128 MB |
| Internal memory | 0.25 GB |
| Processor model | LX 800 |
| Processor frequency | 0.5 GHz |
| Wi-Fi | Yes |
| Maximum data transfer rate | 1000 Mbit/s |
| Supported network protocols | SMB/CIFS, HTTP/HTTPS, FTP, NFS, AFP |
| Compliance industry standards | IEEE 802.11b, IEEE 802.11g |
| USB 2.0 ports quantity | 3 |
| Ethernet LAN (RJ-45) ports | 2 |
| Dimensions (WxDxH) | 165 x 192 x 226 mm |
| Management platform | Linux |
| Compatible operating systems | Windows 7/2000/XP/2003/Vista UNIX/Linux Mac OS 9 / X |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
| Display type | LCD |
| Power supply unit (PSU) capacity | 200 W |
Weight and Dimensions| Weight | 5000 g |
|---|
Step-by-step guide for installing hard disk drives into the N4100PRO chassis.
Guides through configuring the N4100PRO using the installation CD and wizard.
Accessing and logging into the N4100PRO's web-based management interface.
Manages time, notifications, firmware, UPS, and power scheduling.
Configures WAN, LAN, DHCP, Samba, AFP, and NFS settings.
Manages disks, RAID, volumes, and iSCSI configurations.
Manages user accounts, groups, and authentication methods.
Solutions for IP address loss, network mapping, and factory resets.
To Next Page