Add On-Line Register Service
From main menu tree, there is a new “On-line Register” option added with this
firmware release.
This on-line register service can periodically update the user when new firmware
and software modules are released by Thecus. To enable this service, simply check
the “Enable” check box. By enabling this service, the items in bold will be sent to
Thecus via the Internet.
Other than the defined items sent upon registration, there are also two additional
items: “HDD Info” and “Time Zone”. These two optional items can also be sent to
Thecus anonymously for analysis and statistics purposes. To send these items,
simply check the desired checkboxes to help Thecus improve its products and
services.
Added Rsync Setting under Nsync Target
The Thecus Nsync feature has added a third way to use Rsync to replicate data
between two systems. For the target side to allow source cross data, the Rsync
target server needs to first select “Enable” and then assign a username and
password for authentication.
120
To Next Page
Loading...
Need help?
General
Weight and Dimensions
