Connecting DMAs to the Media Server
Next, it’s time to connect your Digital Media Adapter (DMA) to the media server:
1. Connect your DMA to your Media Server
a. Configure your DMA to use a Dynamic IP address. The IP address will
be assigned by the router.
b. Some DMAs are wireless enabled. You can connect the DMA to a
wireless router. For instructions on how to connect your DMA to a
wireless router, please refer to your DMA’s user manual.
2. Connect your DMA’s video output to video input of your TV set.
3. Turn on the TV and change the video signal input to DMA.
4. Setup the DMA (These steps will be different if you use a different DMA)
a. From the Server List screen, select “N4100PRO: Media Server” as
the server.
b. Go to My Media
c. Click on the Up/Down Arrow buttons to select Music Jukebox,
Photo Albums, or Video Clips
d. Start enjoying the contents stored in your N4100PRO.
HTTP/ Web Disk
From the System Network menu, choose the HTTP/ Web Disk item, and the
Web Disk (HTTP) Support screen appears. This screen displays the service
support parameters of the system. You can change any of these items and press
Apply to confirm your settings.
A description of each item follows:
Web Service
Item Description
HTTP (WebDisk) Support Enable or disable WebDisk support. Enter the port number if
this option is enabled. The port number is default 80.
HTTPs (Secure WebDisk)
Support
Enable or disable secure WebDisk support. Enter the port if this
option is enabled.
41
To Next Page
Loading...
Need help?
General
Weight and Dimensions
