Thecus N4100PRO User Manual

Added Rsync Backup Feature
Thecus Nsync now provides backup features to other Thecus NAS with VPN
protection or legacy FTP server with the added Rsync option.
Using “Rsync” to backup data to other Thecus NAS devices uses the exact same
procedure as the original Nsync method. The only thing that needs to be done is to
enable the sync target server and input a valid username and password to grant
access permission.
The Rsync target server username and password is used for this replication
feature only. It is not related to the standard local user.
NOTE
Added additional mode support for Link
Aggregation
The Link Aggregation supported mode has
added more selection up to 6. Administrator
can choose suitable mode to fit environment
needed. Please refer figure to choose from:
121

Thecus N4100PRO Specifications

General

RAID levels	0, 1, 5, 6, 10, JBOD
Storage drive size	3.5 \
Storage drive capacity	- GB
Supported file systems	EXT3, XFS
Storage drive interface	Serial ATA
Total installed storage capacity	8 TB
Number of storage drives installed	0
Number of storage drives supported	4
Flash memory	128 MB
Internal memory	0.25 GB
Processor model	LX 800
Processor frequency	0.5 GHz
Wi-Fi	Yes
Maximum data transfer rate	1000 Mbit/s
Supported network protocols	SMB/CIFS, HTTP/HTTPS, FTP, NFS, AFP
Compliance industry standards	IEEE 802.11b, IEEE 802.11g
USB 2.0 ports quantity	3
Ethernet LAN (RJ-45) ports	2
Dimensions (WxDxH)	165 x 192 x 226 mm
Management platform	Linux
Compatible operating systems	Windows 7/2000/XP/2003/Vista UNIX/Linux Mac OS 9 / X
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	0 - 80 %
Display type	LCD
Power supply unit (PSU) capacity	200 W

Weight and Dimensions

Weight	5000 g