Thecus 1U4500R - Upgrading System Firmware; Change Administrator Password

Upgrading System Firmware
From the System menu, choose the
Firmware Upgrade item and the
Firmware Upgrade screen appears.
Follow the steps below to upgrade your
firmware:
1. Use the Browse button to find the
firmware file.
2. Press Apply.
3. The beeper beeps and the Busy LED
blinks until the upgrade is complete.
• The beeper only beeps if it is enabled in the System Notification
menu.
NOTE
• Check Thecus website for the latest firmware release and release
notes.
Do NOT turn off the system during the firmware upgrade process. This
will lead to a catastrophic result that may render the system inoperable.
WARNING
Change Administrator Password
From the System menu, choose the
Administrator Password item and the
Change Administrator Password screen
appears. Enter a new password in the New
Password box and confirm your new
password in the Confirm Password box.
Press Apply to confirm password changes.
See the following table for a detailed
description of each item.
Change Administrator Password
Item Description
New Password Type in a new administrator password.
Confirm Password Type the new password again to confirm.
Apply Press this to save your changes.
54