EN
Cleaning Instructions:
1. Toggle the MasterSwitch to the left to turn OFF TheraCup
TM
. Ensure that the battery status LED is OFF.
2. Use disinfectant wipes for sanitizing the cups and heating element.
3. Clean TheraCup
TM
with a lightly dampened cloth or an alcohol-based solution if it comes in contact with
anything that may cause stains or other damage, like: dirt or sand, makeup, ink, soap, detergent, acids or
acidic foods, or with liquids other than fresh water, including those that may lead to skin irritation such as:
sweat, salt water, soapy water, pool water, perfume, insect repellent, lotions, sunscreen, oil, adhesive remover,
hair dye, or solvents.
4. Dry TheraCup
TM
with a non-abrasive, lint-free cloth.
5. TheraCup
TM
comes with replaceable filters to prevent foreign substances from damaging the device. To
replace the filter, remove the small rubber cap located at the top of the heated pad. Replace the filter once
every six months.
6
To Next Page
Loading...
