Document Name
User Manual
Document No. TG-TPP-001
Model
Theragun PRO PLUS
Rev
01
Page 15 of 24
icon.
3.8 Discharging personal device from Theragun device
1) You can use the Theragun device to charge your personal device by
connecting one end of the USB-C cable to the Thregun's Type c port, and then
connecting the other end of the cable to the port that fits your personal device.
Then press center button,you'll see a picture of the discharge on the LCD
screen.
3.9 LED module function use
You can Press the center button to turn on the device,an then select “Quick start”
mode.Then you can see LED is ON. If you don`t want motor running,you can use the “v”
key to down the motor speed to 0. If you have connect attachment on device,if you
don`t want to enable the attachment function,you can use“v” to down it to level 0 to
disable it too,or you can just take it off the device.
To Next Page
Loading...
