THERM PRO TP-60 - Product Components Overview; Indoor Base Station Features; Base Station Control Buttons

Components
1. One base station unit (Receiver).
2. One remote sensor (Transmitter).
3. Four AAA size batteries (included).
Indoor Base Station (Receiver) Features
NOTE!
Only use a dry cloth to clean the exterior of the device.
Do not use any cleaning fluid to avoid damaging the
electronics.
-5-
-6-
EN EN
1. LCD display: Displays the current outdoor humidity/
temperature and indoor humidity/temperature.
2. Battery Compartment: Holds 2 AAA batteries to power
the unit.
3. Tabletop and wall-mounted design.
4. Indoor Temperature range: -4°F ~ 158°F (-20°C ~ 70°C).
5. Humidity range: 10% ~ 99%.
6. Temperature display unit: °C and °F selectable.
7. Temperature Resolution: 0.1 °C/°F.
8. Humidity Resolution:1%.
9. Low battery indication.
Buttons
CHANNEL/SYNC: Press once to display the temperature
and humidity readings from up to 3 outdoor remote sensors;
Press and hold this button to enter the synchronization
mode.
MAX/MIN/CLEAR: Press once to display the maximum
or minimum temperature and humidity; Press and hold to
Outdoor
temperature
Outdoor
humidity
Indoor
temperature
Indoor
humidity
Channel/
SYNC
Battery
Compartment
Stand