°F/°C/ALL-TIME/24: Press to select the temperature
display in ºC or ºF; When the display shows the maximum
or minimum temperature and humidity, press this button
once to set the maximum and minimum data record time
interval between ALL TIME or 24 hours. Note: Both ALL
TIME and 24 hours represent the time since you last time
manually cleared the history data or installed a new battery.
1. indicates the temperature & humidity is in an
increasing trend.
Temperature & Humidity Trend
2. indicates the temperature & humidity is in an no
change trend.
3. indicates the temperature & humidity is in a
decreasing trend.
-7-
-8-
EN
EN
Buttons
CHANNEL Selector (1,2,3): Slide to set Channel 1,2 or 3.
RESET: Press once to reset the remote sensor.
1. Battery Compartment: Holds 2 X AAA batteries to power
the unit.
2. Rain-proof and design.wall-mounted
3. Outdoor Temperature range: -58° ~158°F (-50°C~70°C).
4. Humidity range: 10% ~ 99%.
Outdoor Remote Sensor (Transmitter) Features
clear the history data.
Wall hanging hole
TX LED
Sensor detection port
Channel 1.2.3
RESET
TX
2*AAA battery
To Next Page
Loading...
