Do you have a question about the Thermal Care NQA08 and is the answer not in the manual?
Explains various safety warning symbols and their meanings.
Details mandatory actions and protective measures for safe operation.
Addresses hazards of refrigerant, electrical safety, and protective gear.
Guides on verifying unit, inspecting for damage, and documenting issues upon arrival.
Net pump performance curves for 4 and 5-ton chillers.
Net pump performance curves for 7.5 and 10-ton chillers.
Net pump performance curves for 13 and 15-ton chillers.
Net pump performance curves for 20 and 25-ton chillers.
Net pump performance curves for 30 and 35-ton chillers.
Net pump performance curves for 40-ton chillers.
Covers requirements for piping between the chiller and remote condenser.
Discusses factors affecting piping size and system performance.
Tables for calculating total and field piping refrigerant charges for R410A.
Covers wiring standards, voltage requirements, and phase imbalance calculations.
Explains the controller's function, diagnostic tests, and initial sequence.
Details the function of Start, Stop, and Alarm Reset buttons for chiller control.
Lists parameters for alarm delays, autostart, and temperature deviations.
Details how the controller handles faults, including alarm indications.
Specifies requirements for manual resets and remote alarm activations for faults.
Outlines the recommended initial start-up steps for the chiller.
Highlights critical electrical safety warnings and precautions for installation and service.
Guides on connecting power, checking phase sequence, and filling coolant circuit.
Procedure for turning on control power, establishing coolant flow, and initial operation.
A table to track scheduled maintenance activities weekly.
Lists possible causes and remedies for compressor and pump start problems.
Identifies causes and solutions for low and high refrigerant pressure.
| Brand | Thermal Care |
|---|---|
| Model | NQA08 |
| Category | Chiller |
| Language | English |

