Thermaltake TR2 RX - Power Supply Installation

/ Ag) A nt man B50 lv
ATX 12V 2.2 Version
3.4 Power Supply Installation
After install the power supply unit into the chassis and then connect
the 20+4-pin main power cable to motherboard 20pin or 24 pin socket.
Connect the EPS 12V 8pin or ATX 4pin auxiliary power connector to the
motherboard. (Users can use either 4 pins or 8 pins, depending on
the motherboard. Please check with the motherboard user's manual.)
Connect the 6-pin or 8-pin PCI-Express connector to your graphics
card if necessary.
7 Thermaltake TR2 RX Power Supply