To Next PageTo Next Page
Need help?Do you have a question about the ThermaQ MIDI and is the answer not in the manual?
General| Type | Electric |
|---|---|
| Power | 2kW |
| Frequency | 50 Hz |
| Thermostat | Adjustable |
| Mounting | Wall mounted |
Ensure proper grounding and connection to circuit breakers according to regulations.
Install correctly, use as intended, and avoid frozen conditions or magnetic fields.
Flush pipes, check water temperature, and ensure correct valve installation.
Highlights splash-proof casing, aesthetic design, quick reheat, and safety controls.
Details model codes, power, flow rate, material, voltage, current, and dimensions.
Adhere to electrical and plumbing regulations, check power supply and grounding.
Permanently connect to circuit breaker, mount vertically, avoid timber or magnetic fields.
Ensure wall strength, locate near outlets, and maintain correct orientation for oversink/undersink.
Diagrams detail system requirements based on incoming cold mains pressure.
Use 1/2" BSP fittings, flexible hoses, check pressure rating, and fit safety release valve.
Wire according to regulations via a 13A switched spur, ensuring proper cabling.
Switch on mains supply, check indicator light, adjust temperature dial for desired heat.
Periodically clean aerator, inspect/replace magnesium anode annually.
Addresses pressure valve issues, no hot water, insufficient hot water, and leaks.
Lists included items: water heater unit, bracket, rubber plug, instructions, cable clamp.
