Operating Instructions
104
Hourmeters
The Hourmeters Menu allows the operator to view the unit
hourmeters that have the view feature enabled in the Guarded
Access menu. If the view feature for a particular hourmeter is
not enabled then that hourmeter will continue to accumulate
time but cannot be viewed from the Main Menu. However, all
hourmeters can be viewed from the Maintenance Menu, even if
they are not enabled. The hourmeters shown below are
implemented.
Viewing Hourmeters
Only Hourmeters that have been enabled in Guarded Access
are shown from the Main Menu. The Hourmeters can be
viewed only.
Hourmeters are displayed using the Hourmeter Display. From
the Standard Display, press the MENU Key (Figure 127).
Figure 127: Menu Key
The Main Menu will appear. Press the UP or DOWN Key as
required to choose the Hourmeter Menu. When the Hourmeter
Menu is selected, press the SELECT Key to choose the
Hourmeter Menu (Figure 128).
Figure 128: Select Key
MENU
35
°F
35
SET SENSORSGAUGES
POINT
.8
ON
OFF
ON
OFF
MAIN MENU
DOWNEXIT SELECT UP
SENSORS
DATA LOGGER
HOURMETERS
MODE
To Next Page
Loading...
Need help?
General
