Thermo King TriPac DPF - Clearing Fault Codes

Fault Codes
30
Clearing Fault Codes
To clear fault codes:
1. Record the Fault Code(s).
2. Turn the truck’s ignition off.
3. Push and hold the top (REGEN) of the DPF Regeneration
rocker switch for only 2 seconds.
4. If APU shuts down due to [Eng] code, turn off the HMI
main power to clear the code.
5. Turn the HMI back on and restart the APU.
6. If the APU fails to start, contact the nearest Thermo King
Dealer for assistance.
Fault Codes
30
Clearing Fault Codes
To clear fault codes:
1. Record the Fault Code(s).
2. Turn the truck’s ignition off.
3. Push and hold the top (REGEN) of the DPF Regeneration
rocker switch for only 2 seconds.
4. If APU shuts down due to [Eng] code, turn off the HMI
main power to clear the code.
5. Turn the HMI back on and restart the APU.
6. If the APU fails to start, contact the nearest Thermo King
Dealer for assistance.