3
Introduction
Taking the time to read this manual will help in understanding
how to properly operate, service and maintain your Thermo
King Diesel Particulate Filter (DPF) system.
Performing pre-trip checks and enroute inspections on a
regular basis will minimize on-the-road operating problems.
A regular maintenance program will also help to keep your
DPF system in top operating condition. When factory
recommended procedures are followed, you will find that you
have purchased the most efficient and dependable diesel
particulate filter system available.
All service requirements, major and minor, should be handled
by a Thermo King dealer for four very important reasons:
• They are equipped with the factory recommended tools to
perform all service functions
• They have factory trained and certified technicians
• They have genuine Thermo King replacement parts
• The warranty on your new DPF system is valid only when
the repair and replacement of component parts is
performed by an authorized Thermo King dealer.
When the DPF system and it’s components are installed onto a
Thermo King TriPac APU diesel engine, the emission control
level will conform to the California Air Resource Board
(CARB) Airborne Toxic Control Measure (ATCM), and is
warranted for a period of 3-years or 1600- hours, which ever
comes first, as it applies to Auxiliary Power Units (APU). See
“Warranty” on page 37 for complete details.
IMPORTANT: This manual is published for informational
purposes only and the information furnished herein should
not be considered as all-inclusive or meant to cover all
contingencies. If more information is required, consult your
Thermo King Service Directory for the location and
telephone number of the local dealer.
3
Introduction
Taking the time to read this manual will help in understanding
how to properly operate, service and maintain your Thermo
King Diesel Particulate Filter (DPF) system.
Performing pre-trip checks and enroute inspections on a
regular basis will minimize on-the-road operating problems.
A regular maintenance program will also help to keep your
DPF system in top operating condition. When factory
recommended procedures are followed, you will find that you
have purchased the most efficient and dependable diesel
particulate filter system available.
All service requirements, major and minor, should be handled
by a Thermo King dealer for four very important reasons:
• They are equipped with the factory recommended tools to
perform all service functions
• They have factory trained and certified technicians
• They have genuine Thermo King replacement parts
• The warranty on your new DPF system is valid only when
the repair and replacement of component parts is
performed by an authorized Thermo King dealer.
When the DPF system and it’s components are installed onto a
Thermo King TriPac APU diesel engine, the emission control
level will conform to the California Air Resource Board
(CARB) Airborne Toxic Control Measure (ATCM), and is
warranted for a period of 3-years or 1600- hours, which ever
comes first, as it applies to Auxiliary Power Units (APU). See
“Warranty” on page 37 for complete details.
IMPORTANT: This manual is published for informational
purposes only and the information furnished herein should
not be considered as all-inclusive or meant to cover all
contingencies. If more information is required, consult your
Thermo King Service Directory for the location and
telephone number of the local dealer.
To Next Page
Loading...
Need help?
General