Need help?Do you have a question about the Thermo Scientific Finnpipette F2 and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | Finnpipette F2 |
| Category | Laboratory Equipment |
| Language | English |
Defines the device's purpose for liquid transfer within a specific range.
Outlines hazards and necessary safety precautions for users.
Lists factors that can affect dispensing accuracy and potential variations.
Instructions on how to adjust the volume using the pipette's button.
Information on marking the pipette with application details, initials, and calibration dates.
Describes the process for safely removing a used pipette tip.
Detailed steps for aspirating and dispensing liquid using the forward pipetting method.
Steps for aspirating and dispensing with the reverse technique for viscous or foaming liquids.
Procedure for rapid, repeated dispensing of the same volume.
Specific steps for pipetting heterogeneous samples, like blood.
Specifies analytical balance, test liquid, and environmental conditions for calibration.
Outlines the steps for verifying the pipette's calibration accuracy.
Formula and explanation for converting mass measurements to volume.
Defines and explains how to calculate systematic error (inaccuracy) in pipetting.
Defines and explains how to calculate random error (imprecision) using standard deviation and CV.
Daily checks and cleaning procedures for the pipette.
Detailed disassembly and cleaning steps for long-term maintenance of single channel pipettes.
Identifies causes and solutions for pipette leakage issues.
Lists common reasons and fixes for inaccurate liquid dispensing.
Explains causes and remedies for a jammed pipette piston.
Addresses issues with dispensing specific liquids and recalibration needs.
To Next Page