Need help?Do you have a question about the Thermo Scientific Sterilemax 1277 Series and is the answer not in the manual?
General| Type | Autoclave |
|---|---|
| Sterilization Method | Steam sterilization |
| Application | Sterilization of laboratory equipment and materials |
| Control System | Microprocessor |
| Display | Digital |
| Safety Features | Door interlock |
Explains warning, caution, and note symbols used throughout the manual.
Lists critical safety precautions to prevent injury or equipment damage during operation.
Details the four preset sterilization cycles and their specific applications.
Compares sterilization programs, temperatures, times, drying, and items to be sterilized.
Recommends dedicated circuits and proper connection of the power cord to the unit.
Explains how to adjust the sterilizer's program for altitudes above 1000 feet.
Guides users on how to set the sterilizer's internal clock and calendar.
Lists items and materials suitable for steam sterilization.
Provides detailed steps for cleaning instruments before sterilization.
General guidelines for preparing various items for the sterilization process.
Instructions for wrapping instruments and textiles for sterilization.
Critical guidelines for properly loading the chamber to ensure effective sterilization.
Procedures for safely removing and storing sterilized loads, and checking wrapping integrity.
Explains the use of process monitors for immediate cycle verification.
Details the use of biological indicators for verifying sterilization effectiveness.
Steps for powering on the unit and filling the water reservoir.
How to immediately stop a cycle and reset the sterilizer.
Procedure to reset the unit after an automatic shutdown due to OTP.
Actions to take and recovery steps after a power interruption.
Lists common fault indications, their causes, and solutions for cycle interruptions.
Outlines daily, weekly, monthly, and yearly maintenance tasks and responsible parties.
To Next Page