Need help?Do you have a question about the Thermo NESLAB RTE17 and is the answer not in the manual?
General| Temperature Stability | ±0.1 °C |
|---|---|
| Refrigerant | R-404A |
| Pump Flow Rate | 15 L/min |
| Power Supply | Single Phase |
| Power Requirements | 208-230V |
General safety warnings and precautions for operating and maintaining the unit.
Instructions for starting, stopping, and adjusting temperature setpoints on the controller.
Detailed instructions for setting and adjusting low and high temperature alarms.
Information on power supply, voltage, amperage, and circuit breaker specifications.
Instructions for connecting tubing, hose connections, and drain/pump ports.
Explains controller buttons, indicators, and basic operational controls.
Details on adjusting setpoints and temperature alarm limits on the controller.
Guide to the setup/tuning loop for configuring PID parameters and operational modes.
Explanation of adjustable and non-adjustable high temperature cutout features for safety.
Step-by-step guide for calibrating the internal temperature sensor (rtd1).
Procedure for calibrating the external temperature sensor (rtd2).
Lists and explains various error codes that may appear on the unit's display.
A comprehensive checklist to diagnose and resolve common unit issues.
Information for contacting service and factory preset PID values for unit tuning.
Details the framing and byte structure of communication packets for serial data transfer.
Lists available commands for reading and setting unit parameters via serial communication.
To Next Page
