Need help?Do you have a question about the Thermo NESLAB HX 150 and is the answer not in the manual?
General| Temperature Stability | ±0.1 °C |
|---|---|
| Power Supply | 230V, 50/60Hz |
| Pump Type | Centrifugal |
| Cooling Capacity | 1500 W at 20°C |
| Refrigerant | R-404A |
Details on refrigeration system parameters, performance, and charts.
Reference chart correlating R22 refrigerant pressure and temperature.
Method for calculating the heat load of the system.
Specifications for air and water-cooled condensers.
Information on the optional 15-pin accessory connector pinout.
List of parts for HX-100 and HX-150 models.
Essential safety warnings for handling refrigeration systems.
Explanation of the chiller's operational modes (COOL and HEAT/IDLE).
Flowchart for diagnosing and resolving runaway cold issues.
Flowchart for diagnosing and resolving runaway hot issues.
Flowchart for diagnosing and resolving weak cooling problems.
Flowchart for diagnosing issues related to refrigeration pressures.
Detailed steps for replacing the compressor unit.
Guide for safely replacing the fan motor.
Steps for replacing the system's filter/dryer.
Instructions for replacing the solenoid valve assembly.
Procedure for replacing the Tank Coil Assembly (TCA).
Steps for replacing the water regulating valve.
Guide for replacing the capillary tube.
Overarching guidelines for replacing various refrigeration parts.
Procedures for performing speed checks and reading pressures.
Instructions for cleaning and flushing air and water-cooled condensers.
Explanation of the hot gas valve's function and adjustment.
Information on Schrader valves, leak testing, and repair.
Procedures for testing the solenoid coil and rebuilding the valve.
How to identify and repair problems with the TCA.
Correct procedure for setting the water regulating valve.
To Next Page
