EasyManua.ls Logo

Thermo NESLAB HX 150 - Refrigeration Specifications

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
Table 1: HX-100AC Refrigeration Pressures
Ambient Ambient Suction Discharge Speed Check
°F °C PSIG PSIG °C/min
70 21.1 75-83 240-260 1.4-1.6
72 22.2 75-83 245-265 1.3-1.6
74 23.3 76-84 250-270 1.3-1.6
76 24.4 76-84 255-275 1.3-1.6
78 25.5 77-85 260-280 1.2-1.6
80 26.6 77-85 265-285 1.2-1.6
Table 2: HX-150AC Refrigeration Pressures
Ambient Ambient Suction Discharge Speed Check
°F °C PSIG PSIG °C/min
70 21.1 68-81 235-265 2.1-2.6
72 22.2 70-83 240-270 2.0-2.5
74 23.3 72-85 245-275 2.0-2.5
76 24.4 74-87 250-280 2.0-2.5
78 25.5 76-89 255-285 1.9-2.4
80 26.6 78-90 260-290 1.9-2.4
82 27.7 80-91 265-295 1.8-2.3
84 28.8` 82-92 270-300 1.8-2.3
Conditions: 1. Access panels removed. 2. Water in reservoir. 3. Circulating temp 27°C
(81°F). 4. Ambient measured at condenser intake.
Refrigerant specifications
HX100AC HX100WC HX150AC HX150WC
Refrigerant R22
Amount 22oz 20 oz 28 oz 24 oz
Amount (metric) 624 g 567 g 794 g 680 g
Hot gas settings 25 PSIG
Hot gas settings (metric) 172 kPa
High pressure switch - cut in 200 PSI 200 PSI
High pressure switch - cut out 300 PSI 300 PSI
Suction pressure @ 25°C SeeTable 1 86-92 PSIG See Table 2 65 PSIG
Discharge pressure @ 25°C SeeTable 1 180 PSIG See Table 2 175 PSIG

Related product manuals