34
light should turn off when the door is opened approximately 1" and on 1/2" to 1" before
the door is closed.
To Replace Control Module:
Programmable models
1. Turn the screw on the control counterclockwise.
2. As the control module starts to disengage, pull it straight out of the control sleeve.
Automatic models
1. Grasp top and bottom of control, squeeze and pull straight out.
Basic Automatic Control - PC board
1. Disconnect from power supply.
2. Remove lower back cover and remove screws from front cover.
3. Pull control section out to gain access to PC board.
To Next Page
Loading...