EasyManua.ls Logo

THERMOROSSI PELLET AIR 11 - User Manual

THERMOROSSI PELLET AIR 11
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the THERMOROSSI PELLET AIR 11 and is the answer not in the manual?

Summary

1 - INTRODUCTION

1.1 GENERAL GUIDELINES

General instructions for installation, use, and maintenance of the appliance.

1.2 SAFETY GUIDELINES

Highlights essential safety messages and symbols for personal injury and property damage.

1.3 RECOMMENDATIONS

Emphasizes careful reading of the manual for correct appliance use and maintenance.

2 - TECHNICAL CHARACTERISTICS

3 - GENERAL DESCRIPTION

3.1 OPERATING TECHNOLOGY

Describes the appliance's construction and microprocessor management for reliability and performance.

3.2 THE PELLET

Details specifications for approved pellet fuel, warnings against non-compliance, and prohibited uses.

3.3 THE FEEDBOX

Explains the location and loading procedure for the feedbox, with safety precautions.

4 - INSTALLATION

4.1 APPLIANCE LOCATION

Guidelines for positioning the appliance, including ventilation, safety distances, and flooring requirements.

Various Casing Unpacking Procedures

Instructions for unpacking different casing types, referencing specific manuals for details.

4.10 CONNECTING THE APPLIANCE TO THE FLUE OUTLET

Instructions for connecting the appliance to the flue outlet, with warnings about pipe placement.

4.11 HANDLE

Describes the handle for opening the firebox door and its storage.

5 - DESCRIPTION OF THE CONTROLS

5.1 DESCRIPTION OF THE CONTROL PANEL

Overview of the control panel buttons and their functions for operating the appliance.

5.2 DESCRIPTION OF THE POWER PANEL

Details the components of the power panel, including outlets, switches, and indicators.

5.3 DATE: SETTING THE DATE AND TIME

Step-by-step guide to setting the current date and time on the appliance's display.

5.4 CHRONO: ON;OFF PROGRAMMING

Instructions for setting weekly on/off cycles for the appliance, allowing up to three per day.

5.5 LEVEL: OPERATING LEVEL SETTING

Explains how to select different operating levels (programs) to adjust performance based on pellet quality.

5.6 THERMOCOMFORT: ACTIVATING THE CONNECTION WITH THE HANDHELD RADIO CONTROL (OPTIONAL)

Guide to activating the connection with the optional THERMOCOMFORT handheld radio control.

5.7 SHOW CHRONO: ON-OFF PROGRAMMING DISPLAY

Instructions on how to view programmed ON/OFF cycles using the CRONO function.

6 - OPERATION OF THE HANDHELD RADIO CONTROL THERMOCOMFORT (OPTIONAL)

6.1 INDICATORS OF THE HANDHELD RADIO CONTROL

Identifies and explains the various indicators and buttons on the handheld radio control unit.

6.2 USE OF THE HANDHELD RADIO CONTROL

Details how to switch on and use the handheld radio control, including operating programs like MANUAL and AUTO.

6.3 TRANSMISSION CODES SETTING

Procedure for changing transmission codes to avoid interference with other appliances or disturbances.

6.4 CARE AND MAINTENANCE OF THE RADIO CONTROL

Guidelines for protecting and maintaining the radio control to ensure its longevity and proper function.

7 - USE OF THE APPLIANCE

7.1 DESCRIPTION OF THE OPERTATING STAGES

Explains the different operating stages: START, WORK, and OFF, including their durations and conditions.

7.2 SWITCHING ON THE STOVE

Provides a step-by-step guide for powering up and starting the appliance, including pellet loading.

7.3 COMBUSTION AND VENTILATION ADJUSTMENTS

How to adjust combustion power and ventilation speed using control buttons or remote.

7.4 INFRARED REMOTE CONTROL

Describes the functions of the infrared remote control for adjusting ventilation and combustion.

7.5 FILTER

Information on the dust filter, its location, and cleaning frequency for optimal hot air availability.

7.6 HOT AIR DUCTING (ONLY FOR DUCTABLE VERSION)

Instructions for ducting hot air, including pipe requirements and lever operation for air direction.

8 - ADDITIONAL ROOM TEMPERATURE THERMOSTAT (not supplied) ADDITIONAL CHRONOTHERMOSTAT - MODEM (not supplied)

8.1 OPERATING WITH THE ADDITIONAL ROOM TEMPERATURE THERMOSTAT (not supplied)

How to connect and operate an optional room temperature thermostat for automatic regulation.

8.2 OPERATING WITH THE ADDITIONAL CHRONOTHERMOSTAT (not supplied)

How to connect and operate an optional chronothermostat to program start/stop times.

9 - CLEANING AND MAINTENANCE

9.1 FOREWORD

Emphasizes the importance of regular cleaning and maintenance for safe and efficient operation. Voids warranty if ignored.

9.2 CLEANING AND MAINTAINING THE APPLIANCE

Details daily, weekly, and monthly cleaning tasks for the appliance's components.

9.3 CHARGING THE BATTERY OF THE WHITE THERMOCOMFORT HANDHELD RADIO CONTROL (optional)

Instructions for charging the handheld radio control's battery and general battery care.

9.4 BATTERY REPLACEMENT FOR INFRAREDREMOTE CONTROL

Guidance on replacing the battery in the infrared remote control when the signal is lost.

9.5 REPLACING THE BUFFER BATTERY OF THE CONTROL PANEL

Steps for replacing the buffer battery in the control panel if time/programming is not memorized.

10 - SMOKE DISCHARGE TUBE AND VENTILATION OF THE ROOMS

10.1 FOREWORD

Addresses accidents related to flue outlets and emphasizes compliance with standards for gas discharge.

10.2 ROOM VENTILATION

Requirements for proper room ventilation to ensure combustion air supply and safe operation.

10.3 SMOKE OUTLET

Compliance with regulations for smoke discharge systems, including types of appliances and flue connections.

10.3.1 CHIMNEY TYPES

Describes different types of chimneys (System, Composite, Relining) and their construction requirements.

10.3.2 FLUE OUTLET; FLUE SYSTEM COMPONENTS

Identifies components of a chimney and flue system according to UNI EN 10683 standard and prohibits wall outlets.

10.3.3 CONTROLS PRIOR TO INSTALLING THE APPLIANCE

Checks and certifications required before installing the flue outlet, emphasizing sealing and inspection access.

11 - ALARMS

Alarm Codes and Descriptions

Lists and explains the 7 fundamental alarm codes, their causes, and reset procedures.

12 - ELECTRICAL WIRING

Electrical Wiring Diagram and Components

Provides a diagram of the electrical wiring and a legend for its components.

13 - INFORMATION FOR THE SKILLED TECHNICIAN

13.1 MAIN COMPONENTS AND THEIR OPERATION

Explains the function of key components like the smoke pressure switch, screw feeder, and fans.

13.2 REQUIREMENTS NECESSARY FOR CORRECT INSTALLATION AND OPERATION

Lists essential requirements for proper installation, operation, safety, and maintenance of the appliance.

13.3 TROUBLESHOOTING CAUSES-SOLUTION

A comprehensive troubleshooting guide listing common problems, their causes, and solutions.

THERMOROSSI PELLET AIR 11 Specifications

General IconGeneral
BrandTHERMOROSSI
ModelPELLET AIR 11
CategoryStove
LanguageEnglish

Related product manuals