To Next PageTo Next PageWhy won't the burner(s) light on my Thermos 4656110 Grill?
If the burner(s) on your Thermos Grill won't light, it could be due to no gas flow, an obstruction of gas flow, the regulator/valve cap not staying down, or disengagement of the burner to valve. Check to see if the LP tank is empty and clear the burner tubes. If needed, replace with Thermos parts and check the steps in the assembly instructions.
How to fix a Thermos 4656110 Grill burner that won't light with the ignitor?
If your Thermos Grill burner won't light using the ignitor, it could be because the electrode(s) and burner are wet, the electrode(s) are cracked or broken, the wire(s) are loose or disconnected, the wire is shorting between the ignitor and electrode, or the ignitor is bad. Wipe the electrode(s) and burner dry with a cloth. Replace the electrode(s) if cracked or broken. Reconnect loose wires or replace the electrode/wire assembly. Replace the ignitor wire/electrode assembly if necessary.
What to do if the flames blow out on my Thermos 4656110?
If the flames on your Thermos Grill are blowing out, it could be due to high or gusting winds, or low LP gas. Try turning the front of the grill to face the wind or increase the flame height. If that doesn't work, refill the LP tank or replace the 1lb bottle.
What to do if there's a flashback (fire in burner tube(s)) in my Thermos Grill?
If you're experiencing a flashback (fire in burner tube(s)) in your Thermos Grill, it's likely that the burner and/or burner tubes are blocked. Clean the burner and/or burner tubes to resolve this issue.
Highlights critical safety precautions for grill operation and assembly.
Details LP gas properties and safe installation guidelines.
Explains the terms, duration, and limitations of the product warranty.
Lists and details all components and hardware for the lid, body, and base/legs.
Guides on unpacking, preparing components, and assembling the base to the legs.
Covers mounting the grill body, attaching the grease container, and connecting the 1lb propane tank.
Details attaching side shelves and final structural components.
Describes using the grill in different modes and general safe operation guidelines.
Guides on checking the ignitor, lighting the grill, and match lighting.
Details checking burner flames and the correct procedure for turning off the grill.
Details 1lb cylinder specifications, safety, and leak testing procedures.
Covers leveling, general cleaning, burner, and non-stick surface maintenance.
Provides guidance on cooking, food safety, and troubleshooting common grill issues.
Details 20lb tank specifications and the process of safely filling them.
Guides on connecting the adapter hose, leak testing, and securing the 20lb cylinder.
Essential rules for operating the grill safely with a 20lb cylinder, including clearance.
Provisions for using the grill with recreational vehicles, including tank and hose requirements.
General