EasyManua.ls Logo

ThermoSpas Concord Silver User Manual

ThermoSpas Concord Silver
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ThermoSpas®
Designer Series Owners Manual
Safety, Maintenance and Technical Information

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the ThermoSpas Concord Silver and is the answer not in the manual?

ThermoSpas Concord Silver Specifications

General IconGeneral
Heater4.0 kW
Shell MaterialAcrylic
LightingLED lighting
Pumps2
InsulationFull foam
Cabinet MaterialSynthetic
Control SystemDigital
Seating Capacity5-6 people

Summary

Important Instructions and Safety

Safety In and Around Your Spa

Essential safety precautions and warnings for using the spa and its surroundings.

Choosing A Location

Guidance on selecting an appropriate and safe location for spa installation, considering various factors.

Electrical Set Up

Instructions and requirements for safely connecting the spa's electrical system.

Programming Instructions

Setting the Time

Guide to setting the current time on the spa control panel for accurate operation.

Spa Operating Modes

Explanation of Standard, Economy, and other operating modes for temperature and heating control.

Basic Spa Maintenance

Filter Maintenance

Steps for cleaning or replacing spa filters to maintain water quality and system performance.

ThermoOzone System Operation

Information on the ThermOzone system for water sanitation, its components, and chemical usage.

Cover and Plumbing Maintenance

Flushing Spa Plumbing Lines

Procedure to flush and clean spa plumbing lines to remove buildup and maintain hygiene.

Winterizing Your Spa

Spa Components Overview

Circulation/Filtration Pump

Information on the circulation pump used for continuous filtration and its configuration.

Spa Pack and Heater

Common Diagnostic Messages

Overheat Error Codes (OHH, OHS)

Error codes indicating high temperature shutdown, with instructions to cool down and reset.

Freeze and Sensor Error Codes

Codes indicating freeze conditions or sensor malfunctions, with recommended actions.

Common Reminder Messages

Troubleshooting - Water Chemistry

Addressing Cloudy Water

Troubleshooting steps for cloudy water, including filter cleaning and chemical adjustments.

Resolving Brown or Green Water

Causes and solutions for brown water (minerals) and green water (algae) issues.

Troubleshooting - Mechanical Systems

Pump Start and Surge Issues

Troubleshooting steps for pumps that fail to start or surge due to air or low water levels.

Water Pressure and Jet Issues

Addresses low water pressure by checking diverter valves, pump operation, and jet settings.

Control Panel Error Codes

FLO and dr/dry Error Resolution

Troubleshooting steps for "FLO" (flow) and "dr/dry" (heater water) errors, covering filters, water level, and priming.

Electrical Troubleshooting

Breaker Tripping and Spa Leaks

Troubleshooting steps for breakers that trip and identifying/fixing spa leaks.

Water Chemistry Maintenance Schedule

Alkalinity and pH Balancing

Bi-weekly testing and adjustment of alkalinity and pH levels to maintain optimal range.

Water Treatment Procedures

Cleaning Biofilm in Spa Plumbing

Floor Load Determination

Electrical Requirements Chart

Details electrical specifications including voltage, breaker size, number of wires, and wire gauge for different models.

Spa Measurements Chart

Water Capacity Chart

Related product manuals