ThermoSphere BT21 - Sensor mode; Floor sensor type; Mesh mode

To Next Page

To Previous Page

Sensor mode: Select from 5 different

sensor modes. If you connect a oor

sensor the thermostat will automatically

select Floor.

Floor - Floor temperature

Air - Ambient air temperature

Dual - Air temperature with oor limit

PWM - Temperature sensing is disabled

Snow melting - For outdoor heating

applications only. Requires external

wireless sensor.

Floor sensor type: The default is 10K

but you can also select 2K, 12.5K 15K

or 33K to work with the most popular

sensor types.

Mesh mode: Enables mesh

communication between thermostats.

If the external pilot signal input is

activated your thermostat will send the

Eco temperature to all thermostats that

have the same mesh link key.