CS2.3 DESIGN FEATURES
The CS2.3’s uses a unique
compound midrange/tweeter where
to two units are driven by the same
voice coil. Perfect time coherent
performance is achieved without the
cost and complexity of two magnet
structures or an electrical network
for the mid-to tweeter transition.
The 8" woofer uses a very low
distortion short coil/long gap motor
system, powered by a 2.5 magnet.
The rigid aluminum diaphragm
eliminates resonance coloration, a
special copper pole sleeve
reduces inductance distoriton, and
a heavy copper ring maintains an
ultra-stable magnetic field.
The synthesized first-order
crossover provides phase
accurate transitions between
drivers to preserve the
recording’s spatial information.
The network utilizes
polypropylene and custom-made
polystyrene capacitors, and low-
oxygen copper, air-core inductors
for very low distortion and
transparent reproduction.
A 3" thick baffle, 1" cabinet
walls, and internal bracing
greatly increase cabinet
stiffness. By reducing
unwanted vibration, both
clarity and imaging
performance are improved.
The 9" passive radiator
eliminates bass port
resonances and noise.
The baffle is sloped to properly
position the drivers for correct time
alignment and accurate reproduction
of transient musical information. The
rounded edges greatly reduce
unwanted diffraction for more “open”
reproduction.
THIEL • 1026 Nandino Boulevard • Lexington, Kentucky 40511 • USA
Telephone: 859-254-9427 • Fax: 859-254-0075 • E-mail: mail@thielaudio.com • Web: www.thielaudio.com
To Previous Page
Loading...
