Thinkcar Pros+ User Manual

Version: V1.00.001
Statement:
THINKCAR
owns the complete intellectual property rights for the software
used by this product. For any reverse engineering or cracking actions against the software,
THINKCAR will block the use of this product and reserve the right to pursue their legal
liabilities.
THINKCAR

Thinkcar Pros+ Specifications

General

Brand	Thinkcar
Model	Pros+
Category	Motherboard
Language	English

Summary

Safety Precautions and Warnings

Handle equipment carefully

Avoid dropping, bending, puncturing, or placing heavy objects on the device.

Do not disassemble or modify the equipment

Attempting to disassemble or modify the device will void the warranty.

1. Quick Start Manual

1.1 Initial Use

Initial settings for using the tool for the first time.

1.1.1 Turn on the Machine

Procedure to power on the THINKCAR device.

1.1.2 Language Setting

How to select the language displayed on the interface.

1.1.3 Connect WIFI

Steps to connect to a wireless network.

2. Introduction

2.1 Product Profile

Overview of the THINKTOOL Pros+ as a high-end diagnostic equipment.

3. Begin to Use

3.1 Intelligent Diagnose

Performing intelligent diagnosis by automatically reading the vehicle VIN.

3.2 Local Diagnose

Manually selecting vehicle models and systems for diagnosis.

3.4 Programming (only for THINKTOOL Pros+)

Writing software into automotive computer's programmable EPROM or FLASH.

4. Software update

4.1 Upgrade all software

Process for upgrading the device's software to newer versions.

5. Set up

5.1 My VCI

Selecting from multiple registered VCI connectors.