39
4. Remove and Install the Sealing ring
• The Sealing ring can be taken out from the ring groove by
lifting it upwards. To reinstall the Sealing ring, press it into
its groove bit by bit.
BEFORE EACH USE
1. Turn the lid counterclockwise until the mark on the lid aligns
with the (open) mark on the outer pot.
2. Remove the inner pot from the cooker and insure that it is clean and
dry.
3. Add food and liquids to the inner pot following your recipe.
Please note : We suggest that the food and water doesn’t exceed 2/3
full. When cooking foods that expand during cooking, such as rice
and beans, do not fill the unit over 1/2 full. If it’s too full, it may caus-
es blockage of the exhaust pipe or cause excess pressure. This may
cause spillage and damage to the appliance.
To Next Page
Loading...