USING THE BLENDER
• Don’t let the appliance run more than 2 min. at
a time. Allow the motor to cool at least 30 min.
before the next operation.
• Never open the lid when the blade is still mov-
ing. For extra caution, you can unplug the ap-
pliance before removing the lid.
• To add liquid ingredients while blending, remove the measuring cup
from the lid and pour liquid through the opening in the lid.
• Cut solid ingredients into smaller pieces before blending them.
• For a large quantity, pour small batches of ingredients instead of a
large quantity at once.
• Use cooked ingredients for a soup preparation.
• If a liquid is hot or tends to foam (e.g. milk), do not put more than 1
liter in the blender jar to avoid spillage.
• If the result is not satisfactory, switch the appliance off and stir the
ingredients with a spatula.
• To get the best results: use the Max. or Pulse speed.
1. Follow step by step flow pictured below to assemble the appliance.
2. Ensure the jar in step 2 is locked, or the appliance will not work.
3. After operation, you can disassemble the appliance following the
steps below backwards.
4. Always be careful when handling the blades as they are very sharp.
5. Only open the lid when the blades have completely stopped moving.
To Next Page
Loading...
